Festo CPV -VI Series, Manual

Page: 38 / 118

Drill 4 holes with 5.5 mm diameter or a threaded bore
for M5 screws in the fastening surface
Valve
terminal
Rear fitting Front fitting
Diameter of hole Threaded bore for: Diameter of hole Threaded bore for:
CPV10/14 4.5 mm M4 screw 5.5 mm M5 screw
CPV18 5.5 mm M5 screw ---------- ----------
•
Then fasten the CPV valve terminal onto the wall
with four M4 or M5 screws of suitable length.
2.1.2 Fitting onto a hat rail
PLEASE NOTE
In order to fit the CPV valve terminal onto a hat rail
you require the following fitting kits:
– For CPV10/14 valve terminals:
fitting kit CPV10/14-VI-BG-NRH-35
– For CPV18 valve terminals:
fitting kit CPV18-VI-BG-NRH-35
These kits consist of 2 brackets, 2 or 4 M4 x 10 self-
cutting screws (CPV10/14) or M5 x 10 (CPV18) and
2 M4 x 10 screws with clamping pieces and springs.
2. Fitting
2-8
CPV... 9811d