Fervi t047/230v, User And Maintenance Manual

Page: 23 / 52

MACHINES AND
ACCESSORIES
Page 23 of 43
To adjust the table height, proceed as follows:
1. Unlock the locking levers;
2. Hold the handle and turn it clockwise for raising the table, or anticlockwise for lowering it;
3. Tighten the lock nuts.
Changing the table height
It is absolutely forbidden to change the work table height while the spindle is moving.
5.4.2 Handwheel for the longitudinal calibrated feed of the table
The handwheels on the sides of the work table (Figure 13) allow the longitudinal calibrated
feed (to the right and left) of the worktable.
Figure 13 Longitudinal feed handwheels.
5.4.3 Handwheel for the transverse calibrated feed of the table
The handwheel present at the front of the work table (Figure 14) allows the transverse
calibrated feed (forward and backward) of the worktable.
Figure 14 Transverse feed handwheel.
fervi.com