MACHINES AND
ACCESSORIES
Page 5 of 43
1 INTRODUCTION
This manual is considered an integral part of the machine it was attached to at the time of
purchase.
The manufacturer holds all ownership to material and intellectual property of this manual;
any disclosure or copying, even partial, of this publication without prior written consent is
forbidden.
The purpose of this manual is to convey the necessary knowledge for the use and
maintenance of
Milling Drilling Machine with tapping device (Art. T032)
and to create a
sense of responsibility and knowledge of the capabilities and limits of this machine entrusted
to the operator.
As the machine is entrusted to experienced and skilled operators, the following machine must
be perfectly known by the operator if you want it to be used safely and effectively.
Operators must be properly trained and prepared, so make sure that this manual is read and
consulted by the staff responsible for commissioning, operation and maintenance of the
Milling Drilling Machine
. This is to make all operations the safest and most effective
possible for those who carry out these tasks.
Therefore, it is imperative to strictly comply with the requirements in this manual, a
necessary condition for safe and satisfactory operation of the machine.
Before starting operation, installation and usage of the
Milling Drilling Machine
, authorized
personnel must:
read this technical document carefully;
know which protections and safety devices are available on the machine, their location and
how they work.
The manufacturer waives any and all responsibility for damage to people and/or
things caused by non-observance of the instructions in this manual.
The
Milling Drilling Machine
has been designed and built with mechanical guards and
safety devices designed to protect the operator / user from possible injury. It is strictly
forbidden to modify or remove guards, safety devices and caution labels. If you do so
temporarily (for example, for the purposes of cleaning or repair), make sure that no one can
use the machine.
Operators will be held fully responsible for any changes they have made to the
machine; the manufacturer will not be held responsible for any damage to persons
and/or property resulting from maintenance performed by unqualified personnel
and in a manner that differs from the operating procedures shown below.
G
RAPHIC REPRESENTATION OF SAFETY
,
OPERATIONAL AND RISK WARNINGS
The following boxes are designed to attract the attention of the reader / user for the
proper
and
safe
use of the machine:
fervi.com
Summary of Contents for t047/230v
Page 36: ...MACHINES AND ACCESSORIES Page 36 of 43 12 ELECTRICAL CIRCUIT T047 230V T047 400V fervi com...
Page 37: ...MACHINES AND ACCESSORIES Page 37 of 43 12 1WIRING DIAGRAM OF THE CONTROL PANEL fervi com...
Page 38: ...MACHINES AND ACCESSORIES Page 38 of 43 13 PARTS OF THE MACHINE fervi com...
Page 48: ...MACHINES AND ACCESSORIES Page 48 of 48 fervi com...
