MACHINES AND
ACCESSORIES
Page 21 of 43
5.3 Spider for vertical displacement of the spindle
On the right hand side of the head there is a spider for vertical (upward or downward)
displacement of the spindle (Figure 9).
To lower the spindle, i.e. move it closer to the work piece, use one of three knobs, to
lower the spider. After the machining, decrease the pressure on the spider, which will
return it to its resting position away from the workpiece.
Figure 9 Quick feed spider
5.3.1 Graduated adjustment of the vertical displacement of the spindle
The graduated adjustment of the spindle is performed by using
the corresponding handwheel (Figure 10), and verifying the
height to be set by the indicator on the graduated scale located
at the front of the head (Figure 8).
If rotated clockwise, this handwheel allows the slow calibrated
depth feed of the spindle and therefore the tool. And vice versa,
if turned anticlockwise it allows its ascent.
Figure
10
Calibrated feed handwheel.
fervi.com
Summary of Contents for t047/230v
Page 36: ...MACHINES AND ACCESSORIES Page 36 of 43 12 ELECTRICAL CIRCUIT T047 230V T047 400V fervi com...
Page 37: ...MACHINES AND ACCESSORIES Page 37 of 43 12 1WIRING DIAGRAM OF THE CONTROL PANEL fervi com...
Page 38: ...MACHINES AND ACCESSORIES Page 38 of 43 13 PARTS OF THE MACHINE fervi com...
Page 48: ...MACHINES AND ACCESSORIES Page 48 of 48 fervi com...
