MACHINES AND
ACCESSORIES
Page 20 of 43
5.2 Commands for adjusting the speed of the spindle
To adjust the speed of rotation of the spindle, use the controls located at the front of the
head, and in particular:
The levers (ref. G and H in Figure 8) for speed change with gears;
The rotary selector (ref. I) to choose the rotation speed of the motor.
Figure
8
- Speed adjustment.
The 230V model does not have a rotary switch (ref I Figure 10), this is only a feature of the
400V model.
To adjust the speed of the Drill T047, move levers G and H to the desired position, according
to that indicated on the spindle speed plate located below the selector I (Figure 6 and Figure
8).
For example, to set a speed of 600 r/min, proceed as follows:
1. Set the rotary selector for the speed of the motor to I (ref. I in Figure 8);
2. Position the lever G for adjustment of the spindle speed at H;
3. Position the lever H for adjustment of the spindle speed at 1;
Adjusting the Speed
It is absolutely forbidden to change the rotation speed of the spindle while the spindle is
moving.
Motor rotation speed
Remember to always set the correct rotation speed of the electric motor by means of the
rotary selector switch located on the control panel (ref. I in Figure 8).
G
I
H
fervi.com
Summary of Contents for t047/230v
Page 36: ...MACHINES AND ACCESSORIES Page 36 of 43 12 ELECTRICAL CIRCUIT T047 230V T047 400V fervi com...
Page 37: ...MACHINES AND ACCESSORIES Page 37 of 43 12 1WIRING DIAGRAM OF THE CONTROL PANEL fervi com...
Page 38: ...MACHINES AND ACCESSORIES Page 38 of 43 13 PARTS OF THE MACHINE fervi com...
Page 48: ...MACHINES AND ACCESSORIES Page 48 of 48 fervi com...
