Fervi t047/230v, User And Maintenance Manual

Page: 12 / 52

MACHINES AND
ACCESSORIES
Page 12 of 43
4 INTENDED USE AND DESCRIPTION OF THE
MACHINE
Milling Drilling Machines (Art. T047) are machine-tools designed for executing some
simple mechanical operations, such as:
 drilling (max drilling capacity: 32 mm for steel);
 tapping;
 milling.
The machine is made to perform such machining of different materials, changing the tool
depending on the operation to be performed and the material of the work-piece.
The machine has 16 different spindle rotation speeds. The motor runs at constant speed,
therefore the machine is equipped with a specific power transmission system with gears for
varying the spindle rotation speed.
The latter can be set using the appropriate adjustment levers. In any case, the adjustment of
the spindle speed must always be performed with the machine stopped and not powered .
The tool feed is manual.
Intended use and materials
The machine has been designed and manufactured for the use specified. Any use and lack of
respect for the technical parameters established by the manufacturer may be dangerous to
operators; therefore, the manufacturer cannot assume any liability for resulting damages.
4.1 Usage environment and support surface
The Drilling Machine is equipped with a support base and must be installed and used on flat
surfaces, with ergonomic features and adequate resistance.
It is very important to remember that the machine weight is about 400 kg. For this reason,
before installing the machine it is necessary to identify an area having a surface of adequate
hardness and strength, capable of supporting such weight.
You should leave enough space around the machine to ensure proper maintenance and
cleaning of all parts of the machine.
The Drill can operate in enclosed working environments (production departments,
warehouses, etc.), i.e. those that are protected from the weather and where there is no
danger of fire or explosion.
The operating temperature is within the range of +5 / +50°C.
The environment must also be sufficiently illuminated so as to ensure operation in maximum
safety (at least 50 lux is recommended).
Risks associated with the work environment
ALWAYS comply with the instructions about the machine's work environment, especially about
the safety and strength features of the surface.
fervi.com