MACHINES AND
ACCESSORIES
Page 10 of 43
2.2 Safety regulations regarding the electric system of machine-
tools
Risks associated with using the machine
1. Do not modify the electrical system in any way. Any attempt in this regard may jeopardize
the operation of electrical devices, causing malfunction or accident.
2. Work carried out in the electrical system of the machine must, therefore, be carried out
only by qualified and authorized personnel.
3. If one hears unusual noises, or feels something strange, immediately stop the machine.
Then carry out an inspection and, if necessary, perform any repairs as required.
1.
The supply voltage must correspond to that stated on the identification plate and in the
technical specifications:
Do not use any other power supply.
2.
The use of a life-saving device on the electric power supply is recommended. For more
detailed information, contact a trusted electrician.
3.
The power plug must be equipped with a grounding conductor. Any extension cords must
be of equal or greater length than the power cord on the machine.
4.
The power supply cable (and its possible extension cable) should never come in contact
with hot objects, sharp edges, wet or oiled surfaces.
5.
The power cord should be checked regularly and before each use to check for signs of
damage or wear. If these are not in good condition, do not use the machine and replace
the cable.
6.
Do not use the power cord to detach its plug from the socket.
2.3 Technical assistance
For any problem or request for clarification, please do not hesitate to contact the support
service of the retailer from whom you purchased the product.
2.4 Other provisions
It is forbidden to tamper with safety devices
The first thing to do when starting work is to check for the presence and integrity of the
protections and the operation of the safety devices.
If any defect is detected, do not use the Milling Drilling Machine !!
Even more so, it is strictly forbidden to modify or remove guards, safety devices,
labels and indication signs.
fervi.com
Summary of Contents for t047/230v
Page 36: ...MACHINES AND ACCESSORIES Page 36 of 43 12 ELECTRICAL CIRCUIT T047 230V T047 400V fervi com...
Page 37: ...MACHINES AND ACCESSORIES Page 37 of 43 12 1WIRING DIAGRAM OF THE CONTROL PANEL fervi com...
Page 38: ...MACHINES AND ACCESSORIES Page 38 of 43 13 PARTS OF THE MACHINE fervi com...
Page 48: ...MACHINES AND ACCESSORIES Page 48 of 48 fervi com...
