Feig Electronic TST FUZ2-A, Assembly Instructions Manual, Page: 66 / 71

TST Assembly instructions FUZ2 -A/-B/-C/-CX/-L
FEIG ELECTRONIC GmbH Page 64 of 71 FUZ2-A-B-C-CX-L_Montageanleitung_GB
_10.docx
General inputs
E.000 OPEN key on membrane keypad
E.050
STOP key on membrane keypad
E.090 CLOSE key on membrane keypad
E.101 Input 1
E.102 Input 2
E.103 Input 3
E.104 Input 4
E.105 Input 5
E.106 Input 6
E.107 Input 7
E.108 Input 8
E.109 Input 9
E.110 Input 10
E.111 Input 11
E.112 Input 12
E.113 Input 13
E.114 Input 14
E.115 Input 15
E.121 Input 21
E.122 Input 22
E.123 Input 23
E.124 Input 24
E.125 Input 25
E.126 Input 26
E.127 Input 27
E.128 Input 28
E.13A Input 3A
E.13B Input 3B
E.13C Input 3C
E.13D Input 3D
E.13E Input 3E
E.13F Input 3F
Safety- / emergency stop chain
E.201 internal E-Stop "mushroom button" tripped
E.211 External E-Stop 1 tripped
E.212 External E-Stop 2 tripped
Safety edge in general
E.360 Triggering of the 2nd internal safety edge
E.363 Internal safety edge 1 faulty
E.370 Triggering of the 2nd external safety edge
E.373 External safety edge fault
E.379 External safety edge activated but not yet plugged in
E.380 Triggering of the 2nd internal safety edge
E.383 Interruption of the 2nd internal safety edge
E.3F0 Triggering of the 2nd external safety edge
E.3F3 Interruption of the 2nd internal safety edge
Wireless plug-in module
E.401 Wireless Channel 1
E.402
Wireless Channel 2
Inductive loop
E.501 Detector channel 1
E.502 Detector channel 2
E.503 Detector channel 3
E.504 Detector channel 4
Internal-Inputs
E.900 Controller chip fault signal