4
Safety Messages
Mobile Camera System
Federal Signal
www.fedsig.com
Safety Messages
Safety Messages to Installers of Federal Signal Mobile
Camera Systems
People’s lives depend on your proper installation of our
products. It is important to read and follow all instructions
shipped with this product. Listed below are some other
important safety instructions and precautions you should
follow:
• To properly install a vehicular camera system, you must
have a good understanding of automotive electrical
systems along with proficiency in the installation and use
of safety warning equipment.
• The mobile camera system is only a supplement to the
rear-view/side-view mirrors of the vehicle. The system
is not a substitute for the proper use of the rear-view/
side-view mirrors of the vehicle. Always use caution when
backing up.
• DO NOT install equipment or route wiring in the
deployment path of an airbag.
• When drilling into a vehicle structure, ensure that both
sides of the surface are clear of anything that could be
damaged.
• Locate the camera(s) so the VEHICLE and SYSTEM can be
operated safely under all driving conditions.
• Frequently inspect the camera system to ensure that it is
operating properly and is securely attached to the vehicle.
The front face of any installed cameras should be kept
clean and free from any accumulated dirt or grime so that
the cameras may provide the clearest image. Obstructions
to the camera image limit the effectiveness of the system.