15
Installing the Mobile Camera System
Installation and Operation Manual
Federal Signal
www.fedsig.com
• If the camera is to be used in a typical side-view camera
application, the camera should be positioned so that the
driver can obtain a wide, unobstructed field of vision of the
left or right side of the vehicle.
Preparing to Install the Side-View Camera
1.
Open the camera mounting hardware kit, which has:
• four self-tapping screws
• four machine screws with matching lock washers, flat
washers, and nuts
• an Allen
®
wrench for adjusting the orientation of the
camera cover (left or right side of vehicle)
• waterproofing tape
2.
To access the mounting holes in the base as a guide for
marking drill-position holes, remove the four screws that
secure the camera cover. See Figure 2.
Figure 2
Side-view camera installation (CAMAHD-SIDENTSC)
290A6047B