33
Operating the Mobile Camera System
Installation and Operation Manual
Federal Signal
www.fedsig.com
trigger wire. When you turn on the system or switch between
cameras, CAM1 or CAM2 appears for approximately four
seconds to show which camera is being viewed.
To return the system to Standby Mode, press and hold /
CAM/SEL. The red LED lights.
Figure 8 CAMLCD-AHD-56
Menu Options
The Menu button enables you to access these options:
• Color: Adjusts the amount of color information in the
monitor image on a scale of 0 to 30.
• Brightness: Adjusts the degree of brightness in the
monitor image on a scale of 0 to 30.
• Contrast: Adjusts the amount of contrast in the monitor
image on a scale of 0 to 30.
• Volume: Adjusts the volume of the sound from the
microphone in the selected camera on a scale of 0 to 30,
as applicable.
• Return: Returns you to the image of the current camera
and exits the menu.
After you press Menu, select one of the options by moving
up and down the menu options with the + (up) and
–
(down)