36
Operating the Mobile Camera System
Mobile Camera System
Federal Signal
www.fedsig.com
SEL (power/camera select) button select a different pair
of the images of the connected camera (CAM1/CAM2,
CAM2/CAM3, etc.).
• Press Mode/D/N a third time to return to a split-screen
image of all connected cameras.
Automatic Camera Triggering
Automatic triggering of connected cameras is supported as
follows:
• To automatically turn on Camera 1, apply 12-24 V to the
green/red wire. This can both power the monitor from
standby and select Camera 1.
• To automatically turn on Camera 2, apply 12-24 V to the
blue/red wire. This can both power the monitor from
standby and select Camera 2.
• To automatically turn on Camera 3, apply 12-24 V to the
brown/red wire. This can both power the monitor from
standby and select Camera 3.
• To automatically turn on Camera 4, apply 12-24 V to the
black/red wire. This can both power the monitor from
standby and select Camera 4.
Priority for the camera triggers is, from highest to lowest,
Camera 1 > Camera 2 > Camera 3 > Camera 4. In other words,
the Camera 1 trigger has the highest priority and it overrides
other triggers.
Menu Options
Pressing the Menu button enables you to access these
options:
• Brightness: Adjusts the degree of brightness in the
monitor image on a scale of 0 to 30.
• Contrast: Adjusts the amount of contrast in the monitor
image on a scale of 0 to 30.