25
Installing the Mobile Camera System
Installation and Operation Manual
Federal Signal
www.fedsig.com
Figure 5 CAMBRK-HD mounting bracket and hardware
DRILLING PRECAUTIONS: When drilling holes, check the area
into which you are drilling to ensure that you do not damage
vehicle components while drilling. All drilled holes should be
deburred, and all sharp edges should be smoothed. All wire
routings going through drilled holes should be protected by a
grommet or convolute/split loom tubing.
2.
When you are ready to install the monitor mounting
bracket, remove the red backing off of the bottom of the
bracket to expose the adhesive. No adhesive is included
with the heavy-duty mount.
3.
Place the monitor in the mounting location and secure it
with the five self-tapping screws.
4.
Attach the monitor to the mounting bracket and adjust it
to the preferred viewing angle.