11
Installing the Mobile Camera System
Installation and Operation Manual
Federal Signal
www.fedsig.com
Figure 1
Rear-view camera installation (CAMAHD-REARNTSC)
290A6046B
SUN SHIELD
MOUNTING BRACKET
INSULATING
PAD
2 TO 4 SELF-TAPPING SCREWS WITH
PLASTIC INSULATORS, LOCK WASH-
ERS, FLAT WASHERS AND NUTS
VEHICLE
CHASSIS
FLAT WASHER
LOCK WASHER
NUT
Marking and Drilling the Mounting Holes for the Rear-View
Camera
AIRBAG DEPLOYMENT: Do not install equipment or route
wiring in the deployment path of an airbag. Failure to observe
this warning will reduce the effectiveness of the airbag or
potentially dislodge the equipment, causing serious injury.
SEAT REMOVAL PRECAUTION: If a vehicle seat is temporarily
removed, verify with the vehicle manufacturer if the seat
needs to be recalibrated for proper airbag deployment. Failure
to heed this warning could result in death or serious injury.