Feasa 20-F, User Manual

Page: 69 / 132

FEASA LED ANALYSER
FUNCTIONAL VERSION
User Calibration Mode
getCALIBRATIONset - Select the Calibration Set to use
Transmit Receive
getcalibrationset ##
Where:
## represents the set value (## can be 00 to 50).
Description
This command will retrieve which calibration set you are accessing. The Led analyser is
capable of storing fifty one (51) separate user Calibration sets on the board.
The command SETCALIBRATION## stores the Calibration sets both on RAM and on EEPROM
(stays after power cycle but limits the number of set command operations to ~ 100K).
The command PUTCALIBRATION## only stores them on RAM and the analyser will default
back to what values were stored in the EEPROM after a power cycle.
The default calibration set is 00
Example:
If you want to know what set is active
getcalibrationset
03
Back to Index
69