Fayat BOMAG BW 100 ADM-5, Operating Instruction

Page: 190 / 216

15. Unscrew all nozzles and drain off all water.
1. Reinstall all nozzles.
8.13.4 Measures prior to extended shut-down period
8.13.4.1 Measures before shutting down
If the machine is shut down for a longer period
of time, e.g. winter season, the following work
must be carried out:
1. Clean the machine thoroughly.
2. After shutting down store the machine
under cover in a dry and well ventilated
room.
3. Grease the bare piston rods of all hydraulic
cylinders well and pull them in as far as
possible.
4. Spray a thin oil film onto to all lever joints
and bearing points without lubrication.
5. Repair damaged paint; preserve bare
areas thoroughly with anti-corrosive agent.
6.
Clean the water separator.
7. Fill the fuel tank with diesel fuel to prevent
the formation of condensation water in the
tank.
8. Change engine oil and oil filter if the oil has
been changed more than 300 hours ago, or
if the oil is older than 12 months.
B-462-0069
Fig. 190
Before the next use
Maintenance – As required
BW 100 ADM-5 190