Faster GLOVEFAST ASEPTIC, Operating And Maintenance Manual

Page: 29 / 65

a D:GROUP Company
0254EN
– Rev. 06 – 09/2019
Page 29 of 65
8.D REPLACEMENT OF MOTOR-FANS (by technical assistance personnel)
ATTENTION: before replacing the motor-fans, the isolator must be decontaminated and a
sterilization certificate must be issued to the technicians before starting the operation
(see par. 7D). For the safety of the personnel and the environment, the use of PVC
gloves is recommended as well as the collection of the replaced materials in
polyethylene bags.
Replacement of main motor-fan.
1. Proceed as indicated in sub-section "Replacement of HEPA filters", from 1 to 3 points.
2. Remove the frame [19] in front of the fan and release the textile plenum
3. Disconnect electrical connectors from terminal board in the plastic box.
4. Unscrew fastening screws [10] of the main motor-fan [11] and the flow sensor group [15] unscrewing
the relevant stirrup from the motor-fan
19
11
15
10