Faster GLOVEFAST ASEPTIC, Operating And Maintenance Manual

Page: 31 / 65

a D:GROUP Company
0254EN
– Rev. 06 – 09/2019
Page 31 of 65
Replacement of exhaust motor-fan.
1. Proceed as indicated in sub-section "Replacement of HEPA filters", from 1 to 3 points and remove the
exhaust HEPA filter.
2. Remove the textile plenum
3. Remove the screws [17] of the exhaust fan [13] and the electrical connection. Place the new exhaust
fan and set the wiring.
4. Replace the textile plenum
8.E REPLACEMENT OF lighting system (by technical assistance personnel)
1. Disconnect the mains power.
2. Open the front control panel [1] unscrewing the fastening locks [2],
3. Replace the lamps [16]
4. Close the front control panel [1] with the fastening locks [2].
17
13