Faster GLOVEFAST ASEPTIC, Operating And Maintenance Manual

Page: 16 / 65

a D:GROUP Company
0254EN
– Rev. 06 – 09/2019
Page 16 of 65
UV PROGRAMMING:
- use "UP/DOWN arrow" [8] to scroll the operator menu
-
select “UV PROGRAMMING” press "SET" [10]; and the display shows:
UV LIGHTING LENGTH
SET UP hh:mm
- input the desired time for the UV cycle and press SET [10] to confirm
- the display shows:
. UV PROGRAMMING
DATE & TIME
- set date and time with the arrow keys and confirm pressing SET. when the time previously set is
reached the UV lamp switches ON, if the requirements to switch ON the UV lamp are not satisfied
(e.g.: glass open) an alarm message will be displayed.
-
press “ESC” [9] to exit the operator menu.
UV LAMP RESIDUAL LIFETIME:
- use "UP/DOWN arrow" [8] to scroll the operator menu
-
select “U.V. LAMP RESIDUAL LIFETIME.” and press "SET" [10]; the display will show:
U.V. LAMP RESIDUAL LIFETIME
set XXXX
- where XXXX shows the number of the hours set for lifetime of the U.V. lamp.
-
Use the “up and down arrow” keys to adjust the hours parameter
- Then press the "SET" [10] to confirm the data and/or go back to previous menu
- To conclude programming, press
ESC” [9] key.
FILTERS RESIDUAL LIFETIME:
- use "UP/DOWN arrow" [8] to scroll the operator menu
-
select “FILTERS RESIDUAL LIFETIME.” and press "SET" [10]; the display will show:
FILTER 1 RESIDUAL LIFETIME
set XXXX
where XXXX shows the number of the hours set for lifetime of the FILTER 1
-
Use the “up and down arrow” keys to adjust the hours parameter
- Then press the "SET" [10] to confirm the data and pass to filter 2 and so on up to filter 5
- To finish the programming, press
ESC” [9].