4000
Ͳ
LC
Series
D4580880
Ͳ
01
Page
11
of
61
10. Two chamber (0.875” (2.22 cm)) access ports are
provided; one on the rear of the cabinet and one on the
left side. These ports may be used for customer
provided chamber or sample monitoring. The ports are
filled with insulation and both ends are plugged to
reduce moisture infiltration. After monitoring sensors
are installed, replace the insulation, and seal the port
inside and outside of the cabinet. Refer to the Cabinet
Layout Drawing at the end of the manual for port
locations.
Interior view, sensor mounting plate
Temperature Sensor Mount
Remove 4 screws to remove
sensor mounting plate.
