4000
Ͳ
LC
Series
D4580880
Ͳ
01
Page
7
of
61
4.0 Setup/
Installation:
1.
Roll the unit into place near the required power connection. Allow for 6”
(15.3 cm) of clearance from the back and sides for air flow and door
opening clearance.
2.
Remove the foam wrapped (2) shelves (10) shelf clips and the evaporator
pan from the unit interior and unwrap.
3.
Remove the (4) spring feet from the packaging and install on the evaporator
(4) bottom projections of the evaporator pan (small end first). (see photo
below)
4. Chamber drain tubing.
Spring
