![background image](http://html.mh-extra.com/html/farmtek/growers-supply-hydrocycle/growers-supply-hydrocycle_manual_545430013.webp)
13
Revision date: 03.21.18
115295
2d
ASSEMBLY STEPS – INSTALL BULKHEAD PLATE
Raft Bed Assembly
Required parts:
• AQ139
Raft Bed Bulkhead Plate
• 108553
Wafer Head Screw (4)
• 112375
Square Tube @ 15-3/4" w/ 45° Cuts (1)
• FA4572
Tek Screws (2)
• 100442
Magnetic Nut Setter
View of installed pump plate as seen
standing outside
raft bed frame.
Attach plate next to
second support.
NOTE:
Insulation removed to better
show installation of pump plate.
Use parts identified at right to install bulkhead plate. Review Section 1 diagrams for location.
ATTENTION:
Install bulkhead plate opposite where mineralization tank flows into raft bed.
Additional 112375 support
to secure insulation.
After attaching plate to inside of frame
using four 108553 wafer head screws,
attach another beveled support.
Use a utility knife and carefully remove
insulation to access pump plate.
Cut
insulation
to
remove.
View of installed pump plate as seen
standing inside
assembled raft bed frame.
108553