Farm King VT3290, Operator And Parts Manual, Page: 94 / 232

Assembly - VT3000 Series
92
Install two 5/8” x 4-11/16” u-bolts over the support
tube and through the mounting plates on each
harrow hitch. Install two 5/8” lock washers and
5/8” nuts on each u-bolt (Item 2)
[Figure 153] .
Figure 154
Install the harrow assemblies (Item 1) [Figure 154]
onto each harrow hitch.
Refer to the harrow diagrams for correct harrow
type and position.
Center the harrow assemblies on the harrow
hitches. Secure the harrow assemblies to the
harrow hitches using 1/2” x 3-1/16” x 3-9/16”
u-bolts and 1/2” lock nuts (Item 2)
[Figure 153] .
IMPORTANT
Check position and spacing of all harrow
components once installed.
Refer to the harrow diagrams on page 93 for
correct position and spacing depending on model.
Tighten all hardware.
51” Harrow Assembly
Figure 155
Secure tine using two 3/8” x 2-3/4” bolts (Item 1)
[Figure 155]
and two 3/8” nuts.
Secure rods using cotter pins (Item 2) [Figure 155] .
69” Harrow Assembly
Figure 156
Secure tine using two 3/8” x 2-3/4” bolts (Item 1)
[Figure 156] and two 3/8” nuts.
Secure rods using cotter pins (Item 2) [Figure 156] .
11.51
51.00
14.51
17.51
1
2
2
2
11.51
69.00
14.51
17.51
1
2
2
2
1
2
2
1