Farm King VT3290, Operator And Parts Manual, Page: 93 / 232

Assembly - VT3000 Series
91
HARROW (OPTIONAL)
Locate one support tube.
Connect the straps to an approved lifting device.
Raise and move the support tube to the rear of
the frame.
Refer to the harrow diagrams for correct support
tube length and type depending on model.
Bracketed Support Tubes
Figure 151
Align the bracketed support tube (Item 1)
[Figure
151] with the mounting plates on the frame.
Attach using three 5/8” x 2-1/2” hex bolts, three
5/8” lock washers, and three 5/8” nuts (Item 2)
[Figure 151] .
Do not tighten at this time.
IMPORTANT
Refer to the harrow diagrams on page 93 for
correct position and spacing depending on model.
1
2
2
Standard Support Tubes Assembly
Figure 152
Position the standard support tube (Item 1)
[Figure
152] the correct distance from the frame.
Refer to the harrow diagrams for correct position
and spacing.
Install two 5/8” x 4-11/16” u-bolts over the support
tube and through the mounting plates on the
frame. Install two 5/8” lock washers and 5/8” nuts
on each u-bolt (Item 2)
[Figure 152] .
Do not tighten at this time.
Harrow Hitches & Assemblies
Figure 153
Position the harrow hitches (Item 1) [Figure 153]
on the support tube with the correct spacing.
Refer to the harrow diagrams for correct position
and spacing.
2
2
1
2
2
1
1