Navigation settings
User Manual Falk Navigator
- 40 -
3.5 TMC (model dependent)
Your navigation device can receive traffic messages from radio stations (TMC messages).
For this purpose, the power supply cable must be plugged into the Navi in the Active Holder
(model-dependent) since the antenna is also integrated in this cable.
Note:
TMC (Traffic Message Channel) is not available in all countries.
The traffic messages are transmitted via the TMC from radio stations in addition to the radio
program and received and evaluated by the navigation system. The reception of traffic
messages is free of charge.
Note:
Since the traffic messages are transmitted from radio stations, we cannot guarantee
the completeness and correctness of the messages.
Austria: The location and event code was provided by the ASFINAG and BMVIT.
The navigation device checks continuously whether any relevant messages are available for
the set route. All traffic obstructions received are displayed in the Map view. If a traffic
message is considered to be important for the guidance info during the check, the device can
calculate a new route to the destination automatically.
In the TMC settings window you can make
settings for rerouting traffic obstructions in the
event of traffic messages.
By pressing the TMC button repeatedly, you
can choose whether the route should be
changed
Manually
,
Automatically
or
Never
.
With the setting
Never
, you have virtually
deactivated the TMC function.
An automatic search run sets the station with the
best reception. The TMC station currently being received appears on the display.
The TMC messages can be announced by the voice if the option Announce traffic jam
messages is activated in the Navigation settings in the Voice guidance menu.
3.6 Voice
guidance
In the settings window
Voice guidance
you can define all parameters for the voice output of
your navigation device. You have the following options:
Press
Voice
to select various male or female
voices in different languages.
Furthermore, you can set the
Volume
for the
navigation,
button tones
and
warnings
from
"0" (off) to "10" (max. volume) by pressing the
buttons and .
In addition, by setting a green checkmark you
can decide whether street names, the time of
arrival and traffic jam messages (only for voices
with the TTS function!) should be announced.
