FALK NEO 520, User Manual

Page: 31 / 64

Navigation
User Manual Falk Navigator
- 31 -
You can enter the coordinate using three different notations:
ƒ Degree minute second.decimal second, for example 42°52’46.801“
ƒ Degree minute.decimal minute, for example 48° 53.56667'
ƒ Degree decimal, for example 48.89277778
Note: The coordinates entered must comply with the WGS84 (World Geodetic System
1984).
2.1.11 Active route
If you have calculated a route and you are in the Navigation, you can access the main menu
by tapping on the main menu button . Here, by pressing on
Active Route you have the
following options:
ƒ Next destination – if you have entered an interim destination or you are in a tour,
you can head for the next destination.
ƒ Route options – here you can change the route options for the calculated route.
ƒ Route information – here you can find a variety of information on your selected
route, such as the distance to the destination, the time of arrival etc.
ƒ Calculate alternative – here you can calculate and select alternative routes
proposed by the Navi.
ƒ Block the road ahead – here you can avoid the section of the route that is
immediately ahead of you if you know, for example, that road works are there and the
section is impassable. To do this, select the length of the section to be rerouted and
confirm with
OK .
ƒ Clear temporary blockings – you can remove the block of the section previously
set by pressing this button.
ƒ Enter destination – here you can change a current destination or enter a new
destination.
ƒ Add stopover – here you can enter an interim destination that will then be
navigated to prior to the destination that was already entered.
ƒ Delete stopover – here you can delete a previous interim destination.