Navigation settings
User Manual Falk Navigator
- 39 -
3.4.2 Route
type
Note
: If you select bicycle or pedestrian navigation in the first step, the route
cannot
be
optimised according to the following route options.
If you have selected
car
or
motorcycle
or
camper
(depending on model) as a vehicle, you
can choose between the following route options:
Clever:
In this mode you benefit from the
"Learning navigation" of the device software
that compiles a daily and time-dependent route
recommendation for you. The most clever route
that reaches the destination as quickly as
possible is calculated automatically.
Economical:
The navigation device suggests a
route that represents the best compromise
between time and route. When weighing up the
alternatives, the navigation device also takes
into account that the time benefit achieved due to higher speeds can definitely result in
higher petrol consumption.
Fast:
The fastest route to your destination is calculated, which does not have to be the
"cleverest" though, since the current traffic volume is not taken into account.
Short:
The shortest, sensible route to the destination is calculated. This does not always
have to be the fastest route, however.
Tap on
OK
to access additional route options.
3.4.3 Avoid
You have the option, for example, to avoid
Highways
,
Ferries, Long tunnels, roads with a
Period charge
,
Toll roads
or
Environmental
zones
etc. during your journey.
Note:
If you have selected pedestrian or bicycle
navigation, you can only avoid some of these
options.
To do this, tap on the corresponding row. A red X
in the checkmark box indicates that you have
excluded the corresponding vehicle routes, a
green checkmark includes these criteria in the
route guidance.
Note
: If it is not possible to reach the destination
because of the route options you have excluded, the Navigator will place the route along the
actual section to be avoided regardless.
Confirm your settings with
OK
.
