Navigation
User Manual Falk Navigator
- 19 -
Note:
In the case of blocked roads, the following will be displayed: "Calculated delay approx.
> 1 hour."
By tapping on the
Display
button the screen switches to the Map screen and you will see the
position of the traffic jam in the Map view.
F
Points of interest along the route
Using this button you can display points of interest along your route. Prerequisite: A route
has already been calculated.
You can define the categories yourself, from which points of interest will be displayed (see
chapter Route overview, page 36)
G Current
position
Your current position is marked by a red arrow on the map.
H / I Route information
The two buttons in the navigation view provide you with extensive
travel information
about your route. You have the option to customise the information to
meet your personal needs.
Tap on one of the two buttons with the travel information to define the display according to
your requirements.
A selection list is displayed, in which you can view the route information (for example,
altitude, current speed, time, distance to the destination, time of arrival, remaining travel
time). Select an item of travel information and confirm by pressing
Back
. The information you
have selected will now be displayed on the button.
H / I Lane assistant
The lane assistant helps you navigate multi-lane roads or highways and
complicated intersections, e.g. on highways, highway junctions, main
roads and major roads (e.g. in the direction of airports). The lane
assistant indicates instead of the route information, which possible lane you should take on a
junction.
The lanes to be used for the route are represented by a
white arrow
, which leads to the
next turn-off
manoeuvre. A subsequent manoeuvre is also taken into account. Grey arrows
indicate additional lanes that should not be used.
J Volume
When you call up the speaker icon, you can use the volume control. You can now adjust
the volume for each of the navigation announcements, keyboard tones and warnings
separately by clicking on the corresponding
+/-
buttons. If you want to switch off the sound
completely, reduce the volume to the value "zero".
K
Main Menu Button
By tapping on the triangle button you can access the
main menu
of the Navigator
functions.
