Navigation
User Manual Falk Navigator
- 21 -
2.1 Entering
a
destination
GPSStatus
All Navigation programs require sufficient satellite coverage in order to continuously
determine your current location using a GPS (Global Positioning System) signal.
Note
: The first time you switch on the device, it may take a few minutes to recognise the
GPS position. On subsequent occasions, your position will be recognised more quickly when
the device is switched on.
If you accidentally miss a turnoff or take an incorrect turn, a new route is calculated
automatically. You are safely guided to your desired destination by navigation
announcements and the screen also displays your current position and the route you need to
take.
You will automatically be in
free driving mode
unless you are heading for a particular destination
or you are in
simulation mode
. Even if you are
not heading for a particular destination and would
just like to explore the local area, you can still
have the navigation screen show your current
position at all times.
You can end a navigation or simulation in the
main menu by tapping on the button with the
current destination.
You can enter a destination of your choice and let the navigation device guide you there
conveniently by tapping on the
Enter destination
button. With the Falk Navigator, you can
navigate to a specific house number (depending on the map material).
You have several options for selecting a destination by:
entering
an
address
selecting
My favourites
selecting
Last destinations
selecting
Points of interest
selecting a destination in the
Travel Guide
(depending on model)
Enter geocoordinates
using
Select on map
using
the
Route planning
Note:
If you have already specified a home address, you can navigate home at any time by
tapping on "Home" in the main menu.
You do not have to always specify the full address to select a destination. It is sufficient to
select a country and location, and possibly a street, in order to calculate a route or to refine
