Falcon E3840, Installation, Servicing And User Instructions Manual, Page: 11 / 37

7
2.0 ASSEMBLY and COMMISSIONING
The electrical cable must be connected in accordance with the various regulations listed on
the cover of this manual.
2.1
ASSEMBLY
a) Unpack appliance.
b) Unpack fryer baskets and accessories.
c) Place element guard and baskets in pan.
d) Level appliance and fit all service protection kits.
e) (Anti-tilt kit, if ordered as accessory).
2.2
CONNECTION TO AN ELECTRICAL SUPPLY
The supply cable must be connected to a suitable isolator switch as follows:
Phase 1 Phase 2 Phase 3 Neutral Earth
Brown Black Grey Blue Green/Yellow
2.3
STARTING UP
2.3.1 E3840/E3840F Fryer Control Panel (See Figure 2)
Figure 2
– E3840/E3840F Control Panel
1. ON/OFF and Temperature Control Knob
Temperature Selection (140 - 190°C). (Unit is off when in position indicated).
2. Fat Melt Position
Feature for slow pulsed heating of solid fats.
3. Power on indicator (Red)
4. Heat Demand Indicator (Amber)
illuminates when elements are on. Goes out when desired temperature is reached.