Faithtech FT68200 Operation Manual
38
5. Press
to start test.
Notice: When the slope setting conflicts with the pulse width setting,
priority is given to ensuring the pulse width.
TOGG Mode (Toggle)
In TOGG mode, if a trigger signal is received, the load will switch between current-1 and
current-2, and the switching time is determined by the slope.
Figure 3-12 TOGG Mode
1. Set “Way” as TOGG;
2. Set “CC-1” and “CC-2”;
3. Set “Slew-UP” and “Slew-DN”, unit A/us;
4. Press
to start test;
5. Press
to generate trigger signal in order to switch between CC-1 and
CC-2.
3.4. Slew rate and minimum conversion time
The current slew rate defines the switching speed between two current settings in
constant current mode. The time for the load to switch from one current value to another
current value can be set by changing the current slew rate. The following figure illustrates
the relationship between the slew rate and the actual conversion time.
Summary of Contents for FT68200 Series
