Fagor CNC 8055, Manual

Page: 125 / 166

CNC 8
0
5
5
/ CNC 8
0
5
5
i
Page 65 of 106
N
EW
F
EATURES
(S
OFT
M: 9.1
X
)
Note: When selecting the drive parameters at the CNC, it will display
the ones stored in each drive and if any are modified, they are modified
at the drive. The CNC does not have parameters of the drive although
their copies may be stored in the "Memkey Card" (Card A).
Select the group of parameters or variables to display in the GROUP
window. To change the group, press the [change group] softkey, select
the new group with the [
Ï
] [
Ð
] keys and press [ENTER].
Use the SET window to select the set of parameters or variables to
be displayed. To select another set, press the [change set] softkey,
select the new set with the [
Ï
] [
Ð
] keys and press [ENTER].
The NODE window indicates the node number that identifies the drive
in the Can connection, i.e. the position of its rotary switch.
The main window shows the selected variables or parameters of the
group and set indicating in each variable its Fagor name, its value, its
meaning and its Sercos identifier.
If the variable does not have a write permission, an icon of a key will
appear before the Fagor name.
This information is updated when selecting a new data (group or set),
when modifying any variable or parameter and using the "page up and
page down" keys. It is not refreshed continuously.
The ACCESS window shows the permitted access level. There are
three access levels at the drive: basic level, OEM level and Fagor level.
To change the level, press the [password] softkey, key in the relevant
code and press [ENTER].
The VERSION window shows the software version installed at the
drive, the name of the motor associated with the drive and the drive
model.
The softkeys available in this mode are:
Password Modifies the access level selected in the ACCESS window.
To access the drive parameters with an OEM access level, the
p a sswo rd i s de fi ne d i n U ti l iti e s m od e as O EM P SW ; n ot a
preestablished one as when using the Sercos interface.
Modify To modify the variables that are not protected (those without the key
icon next to them).
After selecting the variable with the [
Ï
] [
Ð
] keys, pressing the "modify"
softkey displays two windows. The first one shows the range of
possible values and the second one the current value. Enter the new
value and press [ENTER].
The drive assumes that value and refreshes the screen.
Execute command Shows the list of commands that can be executed by the drive. Select
one using the [
Ï
] [
Ð
] keys and press [ENTER].
Change group Select the group of parameters or variables to be displayed.
Change set Select the number of the set of parameters or variables to be
displayed.
To drive flash The drive stores all its parameters in its flash memory and it then
executes a soft-reset command. This command interrupts the
communication through Can. Press [ENTER] to restore it.