Fagor CNC 8055, Manual

Page: 108 / 166

N
EW
F
EATURES
(S
OFT
M: 9.0
X
)
CNC 8
0
5
5
/ CNC 8
0
5
5
i
Page 48 of 106
The screens of the pockets and bosses will indicate with icons which
positioning they have associated or whether they are alone.
In the positioning, an icon will show the pocket or boss to be repeated
and the bottom screen will give information on its geometry (except
in profile pockets).
When machining multiple pockets and bosses, proceed as follows:
• There is neither roughing or finishing operation.
It goes point to point carrying out the cycles at once (there is no
tool change).
• There is a roughing and finishing operation with the same tool and
it is not possible to program "M" functions between them.
It goes point to point carrying out the cycles at once (there is no
tool change).
• There is a roughing and finishing operation with a different tool or
it is possible to program "M" functions between them.
It first does the roughing and then all the finishing operations (only
one tool change).
Rectangular pocket in different multiple positionings.
The availability of "M" functions in the cycles is determined with g.m.p.
"CODISET (P147)".
i