Fagor CNC 8055, Manual

Page: 100 / 166

N
EW
F
EATURES
(S
OFT
M: 9.0
X
)
CNC 8
0
5
5
/ CNC 8
0
5
5
i
Page 40 of 106
18 Modifications and new variables
HARCON It indicates, with bits, the CNC's hardware configuration. The bit will
be "1" when the relevant configuration is available.
8055 CNC model:
8055i CNC model:
HDMEGA Hard disk size in megabytes.
MEMTST HD test result. Bit 8 will be set to "1" if the test is OK and it will have
another value if there is an error.
HARSWB It returns, in 4 bits, the central unit configuration.
• If the value of the bits is 0001, it will be an SJ1000 type.
• If the value of the bits is 0010, it will be an OKI9225 type.
IONODE It may be used to read the position of the "ADDRESS" switch of the
CAN of the I/O. If it is not connected, it returns the value 0xFFFF.
IOSLOC
IOSREM
They may be used to read the number of digital I/O available.
Bit Hardware
29 Hard disk integrated into the CPU.
30 Ethernet integrated into the CPU.
31 Compact flash.
Bit Hardware
30 Ethernet.
31 Compact flash.
Bit
19,18,17,16 Type of CAN present at COM1.
23,22,21,20 Type of CAN present at COM2.
Bit
0-15 CAN of the I/O.
IOSLOC Number of local I/O.
IOSREM Number of remote I/O.
Bit
0-15 Number of inputs.
16-31 Number of outputs.