Fagor CNC 8055, Manual

Page: 106 / 166

N
EW
F
EATURES
(S
OFT
M: 9.0
X
)
CNC 8
0
5
5
/ CNC 8
0
5
5
i
Page 46 of 106
25 MC model. Highlighting the axis being moved in jog or with
handwheels
When making a move in manual, either in jog or with handwheels, the
moving axis appears in reverse video.
With gantry axes, only the master axis is highlighted.
With a path handwheel, no axis is highlighted. However, it is
highlighted in movements in path jog.
26 MC model. Copying a profile
Following these steps to copy a profile:
1. Expand the list of profiles. To do this, place the focus on that
element and press [
Ð
].
2. Place the cursor on the profile to be copied and press [PPROG].
3. The CNC requests the number of the new profile and it also allows
changing its comment. If the number entered is the same as that
of an existing profile, it requests confirmation to replace it.
To exit the list, simply press [
Í
], [
Î
], [ESC], [SHIFT]+[ESC] or any
cycle entering key.
27 MC model. Select a program by indicating its number
When having lots of programs in memory, it may be cumbersome to
select a program with the cursor. It is now possible to select the
program by typing its number directly. Before that, the cursor must be
on the program listing.
If the desired program does not exist, the cursor will go to the nearest
previous one.
For example: To find program number 123, press the keystroke
sequence [1], [2] and [3]. The time interval between keystrokes must
be shorter than 1.5 seconds. If it takes longer, it will be necessary to
start a new sequence.