Chapter 3 - page 4
MCO-TCO work mode
W1
W2
W3
W4
W5
W6
W7
W8
W9
W10
W12
W11
3.3 OEM CYCLES
As mentioned earlier at beginning of this chapter, up to 200 OEM cycles may be defined.
Every OEM cycle has the following elements associated with it:
•
The OEM screen with the same number, created with the Wgdraw application software.
•
The configuration file P999xxx
•
The routine containing the executable program 9xxx
•
The program containing the texts used by all the screens P999995
•
The program containing the help texts for the cycles P999994
This section describes the procedure to create OEM cycle 001 and how the user must define its data.
In other words:
•
How to create screen 001 with the Wgdraw application software (OEM)
•
How to define the configuration file P999001 (OEM)
•
How to define the associated routine 9001 (OEM)
•
How to edit cycle 001 (user)
3.3.1 SCREEN DEFINITION
We will use screen 001 of the example that comes in the Wgdraw application manual.
The data the user may edit in this cycle use "W" as identifier, the number associated with each one
of them indicates the order in which they are selected (W1, W2, ... W11, W12).
