Chapter 3 - page 17
MCO-TCO work mode
3.8.2 DEFINITION OF SPINDLE CONDITIONS
Work mode (RPM) or (CSS)
Move over the "RPM" or "CSS" icon and press
Spindle range
Move over this item, key in the desired value and press
Maximum spindle turning speed in rpm (S)
Move onto this item, type in the required value and press
Spindle turning direction
There are 2 ways to select the spindle turning direction:
a) Move onto this item and press
to change the icon.
b) Start the spindle in the direction required by means of the JOG keys
The CNC starts the spindle and assumes said turning direction as spindle turning data for the
cycle.
3.8.3 DEFINITION OF MACHINING CONDITIONS
Axis feedrate (F)
Move onto this item or press
, key in the value required and press
Spindle turning speed (S)
Move onto this item or press
, key in the value required and press
Tool for machining (T)
Move onto this item or press
, key in the value required and press
The CNC updates the "D" offset and the adjacent icon, displaying the graphic representation for
the location code associated with the new tool.
Tool offset number (D)
Move onto this item, key in the value required and press
