Chapter 4 - page 2
MCO-TCO work mode
4.1 LIST OF STORED PROGRAMS
To access the list of part-programs stored press
On the left there is a list of part-programs that are stored in the CNC’s memory.
When there are more programs than those displayed in the window, use
and
to move the
pointer over the list of programs. To go forward or backward page by page use the following
combinations of keys
and
.
The right-hand column will display the cycles and the ISO blocks that make up that part.
After selecting the program list, the CNC will let you:
Create a new part-program
See the content of a part-program
Erase a part-program
Copy a part-program in another
Modify a part-program
To leave the directory or list of part-programs press:
the
key
the key for an operation
the key
Warning
It is recommended to define, in the WGDRAW application software, the title text
with the same number as that of the cycle.
Because the CNC shows the cycle title next to the number (text of program P999995
with the same number).
IN POSITION
PART-PROGRAMS
CYCLES
CREATING A NEW PART
POSITIONING CYCLE 1
USER CYCLE 5
USER CYCLE 3
USER CYCLE 7
