16
(6
¡A
TENCIÓN!
Antes de proceder a eliminar los defectos hay que desconectar la cocina de la red
de alimentación.
Si durante el uso de la cocina aparecen defectos, hay que verificar según las indicaciones
señaladas abajo si puede usted mismo eliminar el defecto.
No funciona la iluminación del horno
Si el horno funcionaba y está caliente hay que esperar a que
se enfríe.
•
La bombilla no está bien apretada - desenroscar la
protección de vidrio
1
de la lámpara del portalámparas
2
y
apretar la bombilla
3
(figura 15).
•
La bombilla está fundida - desenroscar la protección de
vidrio
1
de la lámpara y cambiar la bombilla por otra nueva
cuyos parámetros son:
tipo E14; 230V
; 25W
; resistencia a la temperatura 300
0
C.
Fig. 15
ELIMINACIÓN DE DEFECTOS
6 ELIMINACIÓN DE DEFECTOS
1
2
3
A
TENCIÓN!
1
.
Utilice el limpiador específico para horno únicamente para limpiar superficies
es-maltadas. No debe limpiar con este limpiador los paneles catalíticos.
2.
Asegúrese de colocar las guías correctamente. La varilla que limita introducción
de la bandeja en el horno debe estar en la parte posterior del mismo.
1
*%
INTRODUCTION
Thank you for choosing one of our quality products, capable of giving you the best
service.
Read carefully these instructions for use and maintenance before installing and using
your appliance. They include the important safety information, and guidelines and
recommendation which enable you to take full advantage of all the functions available.
T
o
ensure its appliances are always at the state of the art, and/or to allow constant
improvement in quality
, the manufacturer reserves the right to make modifications without
notice, although without creating difficulties for users.
Our appliances comply with the safety regulations EN 60335-1 and EN 60335-2-6.
The appliance must only be installed by a certified electric fitter or technician of an authorised
service shop, in accordance with the local regulations in force.
The manufacturer declines all responsibility for injury or damage caused by poor installation
or improper use of the appliance.
CAUTION !
1.
The appliance must only be repaired by authorised service staff. If your appliance is
not repaired properly, you could be putting yourself in danger. Do not use a damaged
cooker until it is put in order.
2.
Never lift the cooker by taking hold of the oven door handle.
3.
If the surface is cracked, switch off the apliance to avoid the possibility of electric
shock.
4.
During use the appliance becomes hot. Care should be taken to avoid touching heating
elements inside the oven.
5.
Ensure that the apliance is switched off before replacing the lamp to avoid the possibility
of electric shock.
Summary of Contents for 4CF-564E
Page 2: ......
