![background image](http://html1.mh-extra.com/html/fadini/bayt-980/bayt-980_instruction-booklet_3167845017.webp)
DECLARATION OF CONFORMITY
- INOX
VERSION
-
page
17
Made in Italy
the gate opener
BAYT 980
Oleodinamica
1.
Control box
2.
Elpro 980
Electronic
Programmer
3.
Cable
and
terminals
set up
inside of the housing cabinet
for the connection of the LED
lamps
4.
Bayt 980
housing cabinet
5.
LED
lamps
6.
Small PCB for
Al. Flex 34
LED
flashers with container
1
2
3
4
5
6
POSSIBILITY OF INSTALLATION OF THE ALUMINIUM BARRIER BEAM WITH "LED" LAMPS
FIG. 30
In the event of an installation of the Bayt 980 with
LED lamps
it is possible to connect the
Al.Flex 34
command device
and to obtain the alternating flashing without pauses or else the alternating flashing of the "flash" type (Fig.30).
Led lamps
Al.Flex 34
Bayt 980
Manufacturing Firm:
Model:
Hydraulic barrier for driveways
The
Bayt 980
is marketed to be installed as an "automated system" with original accessories and components indicated
by the Manufacturing Firm.
The automated mechanism, according to the provisions of the law is a "machine" and therefore the installer must apply
all safety regulations to it. The same installer must also issue his/her own Declaration of Conformity.
The manufacturing firm assumes no responsibility for the improper use of the product. The product has been deemed
compliant with the following specific regulations:
- Analysis of Risks and successive procedures for eliminating them:
EN 12445
&
EN 12453
- Low Voltage Directive
2006/95 CE
- Electromagnetic Compatibility Directive
2004/108/CE
Address:
meccanica
FADINI
snc.
IS COMPLIANT TO THE MACHINE DIRECTIVE.........2006/42/CE
FURTHERMORE:
With the purpose of certifying the product, the Manufacturer declares under his own responsibility the compliance with the
EN 13241-1
PRODUCT REGULATIONS
Date:
DECLARES UNDER ITS OWN RESPONSIBILITY THAT:
THE DECLARATION OF CONFORMITY
of the Manufacturer
GB
Meccanica Fadini s.n.c.
Managing Director
The Manager
Hydraulic
10-01-14
- inox -
Made in Italy
the gate opener
Via Mantova 177/A - 37053 Cerea (VR) Italy
Te l . 0 4 4 2 3 3 0 4 2 2 - F a x 0 4 4 2 3 3 1 0 5 4
e-mail: [email protected] - www.fadini.net
BAYT 980