!
!
15cm rubber
profile
ATTACHMENT OF THE BAYT 980 FOLDING LEG
R532
aluminium
barrier beam
Nuts
BAYT 980
Oleodinamica
4
3
1
2
Counterweight
attachment support
barrier beam
M8x65 T.E.
Galvanised screws
R533 reinforcement arm - 3.0 metres
Galvanised M8 nut
R532 anodised
aluminium
Barrier beam cap
Folding leg
Counterweights
(10 kg each)
Attachment bolts
Bayt 980
Right handed version
Important:
the number of counterweights in different installations varies
according to the length of the barrier beams attached and to the
presence or not of the fencing. (See table Fig. 34, page 20).
Important:
the length of the counterweight attachment bolts varies with the
number of counterweights needed.
Barrier beam cap
Setscrew
Folding leg
length m............. 4.20
length m.............. 5.30
length m.............. 6.40
length m.............. 7.40
length m.............. 8.50
R532
FIG. 12
R532
barrier beam
with aluminium
fencing
length metres............... 3.80
length metres............... 4.75
length metres............... 5.89
length metres............... 6.84
length metres............... 7.98
R532
Coupling strut
FIG. 13
INSTALLATION OF COUNTERWEIGHTS ON THE BAYT 980
F
D
E
D
= 2.09m
E
= 1.71m
F
=
0.57m
Aluminium fencing
STANDARD MODULES
FIG. 14
In the Bayt 980 installation with barrier beams that are 6.40 metres in
length or longer with fencing, it is necessary to also attach
counterweights
with nuts, bolts and attachment support. (Fig. 14).
In installations in which the
folding leg
is
required, it is necessary to insert in the
specific slot in the bottom of the "R532" barrier
beam a
15 cm rubber profile
(so as to cushion
the shock in the closing phase of the barrier
beam) and then the folding leg, by way of its
specific attachment. Then tighten everything
with the
Setscrew
(Fig.12).
In the event that the fencing is to be installed it is also necessary to attach
the
coupling strut
between the leg and the fencing, utilising the relative nuts
and bolts (Fig. 13)
!
!
page
7
Made in Italy
the gate opener
Bayt 980