MAIN COMPONENTS FOR THE BAYT 980 ELECTRICAL SYSTEM
BAYT 980
Oleodinamica
n°3x1
n°2x0.5
1.
230V - 50Hz magneto-thermic
differential line switch of 0.03A
(not provided by the
manufacturer) (more than
100 m of 2.5 mm
2
section cable)
2.
Miri 4
flasher with
Birio A8
aerial
3.
Chis 37
built-in keyed selector
switch
4.
Fit 55
built-in photocell
receiver
5.
Bayt 980
hydraulic barrier with
Elpro 980
programmer and
Siti 63/2 R
plug-on radio card
6.
Pedestal with yoke
7.
Fit 55
built-in photocell
receiver
8.
Housing cabinet with photocell
support
9.
Siti 63/2 TR
Transmitter
1
5
2
3
7
8
6
Siti
9
!
Important:
before carrying out any procedure on the PCB, disconnect the electric power supply mains.
It is furthermore recommended that the booklet "Safety Regulations" made available by Meccanica Fadini
be examined thoroughly.
269
1
4723
DX
4723
DX
4723
DX
!
4723
SX
4723
SX
4723
SX
2691
Important:
Once the Bayt 980 desired has been obtained it is necessary to:
1) Invert the limit switch connections for opening and closing in
the electronic programmer terminals.
2) Invert the electrical motor phases in the output of their respective
electronic programmer terminals
Bayt 980
- LH -
Left
FIG. 7
HOW TO MAKE THE LEFT HANDED BAYT INTO A RIGHT HANDED BAYT AND VICE VERSA
BAYT
980
BAYT
980
Bayt 980
- RH -
Right
FIG. 8
4723
SX
4723
SX
4723
SX
4723
DX
4723
DX
4723
DX
LH
RH
!
Important:
THE ENTIRE SYSTEM MUST BE CONNECTED TO EARTH
Important:
all of the electrical connections and the cabling must be carried out to standard, with respect for the proper rules of installation, according to the safety
regulations in force (Machine Directive 2006/42/CE) and must be performed by qualified technical personnel, formulating a complete
risk analysis
and adopting
suitable safety measures in the
filling out of the Technical File
, according to the
EN 12445 ed EN 12453
Regulations.
-
For the Electrical power supply of the electrical motor and the flasher,
electrical cables with a section of 1 mm
2
will be utilised for a maximum distance of 50 metres.
For distances longer than 50 metres it is recommended that cables with sections suitable for a proper standard of installation be used. For all of the accessories
external to the electrical control panel, electrical cables with wires of a section of 0.5 mm
2
may be utilised.
4
Actuation
connecting rods
!
!
!
Bayt 980
page
5
Made in Italy
the gate opener