Bayt 980
DECLARATION OF CONFORMITY
- PAINTED
VERSION
-
BAYT 980
Oleodinamica
8.100
(max. net length)
510
450
~ (*)
Bayt 980
Right handed version
GENERIC INSTALLATION WITH COUNTERWEIGHTS, CABLES, FENCES AND LED LAMPS
FIG. 29
!
Important
(*) Dimensions are variable based on the number of counterweights attached. See Page 20.
!
page
16
Made in Italy
the gate opener
Via Mantova 177/A - 37053 Cerea (VR) Italy
Te l . 0 4 4 2 3 3 0 4 2 2 - F a x 0 4 4 2 3 3 1 0 5 4
e-mail: [email protected] - www.fadini.net
Manufacturing Firm:
Model:
Hydraulic barrier for driveways
The
Bayt 980
is marketed to be installed as an "automated system" with original accessories and components indicated
by the Manufacturing Firm.
The automated mechanism, according to the provisions of the law is a "machine" and therefore the installer must apply
all safety regulations to it. The same installer must also issue his/her own Declaration of Conformity.
The manufacturing firm assumes no responsibility for the improper use of the product. The product has been deemed
compliant with the following specific regulations:
- Analysis of Risks and successive procedures for eliminating them:
EN 12445
&
EN 12453
- Low Voltage Directive
2006/95 CE
- Electromagnetic Compatibility Directive
2004/108/CE
Address:
meccanica
FADINI
snc.
IS COMPLIANT TO THE MACHINE DIRECTIVE.........2006/42/CE
FURTHERMORE:
With the purpose of certifying the product, the Manufacturer declares under his own responsibility the compliance with the
EN 13241-1
PRODUCT REGULATIONS
Date:
DECLARES UNDER ITS OWN RESPONSIBILITY THAT:
THE DECLARATION OF CONFORMITY
of the Manufacturer
GB
BAYT 980
Oleodinamica
Meccanica Fadini s.n.c.
Managing Director
The Manager
BAYT 980
Hydraulic
10-01-14
- painted -
Made in Italy
the gate opener