background image

MLS

P. 1 / 3

EM-1644

INSTRUCTION  MANUAL

MODEL

MLS

Input Resistor

DIGITAL MULTIPLIER

 FRONT PANEL CONFIGURATIONS

INSTALLATION

Detach the yellow clamps located at the top and bottom of the
unit for separating the body from the base socket.

■ 

DIN RAIL MOUNTING

Set the base socket so that its
DIN rail adaptor is at the bot-
tom.  Position the upper hook
at the rear side of base socket
on the DIN rail and push in
the lower.  When removing the
socket, push down the DIN
rail adaptor utilizing a screw-
driver (–) and pull.

■ 

WALL MOUNTING

Refer to the drawings in the
following page.

TERMINAL CONNECTIONS

Connect the unit as in the diagram in the next page or refer
to the connection diagram label on top of the unit.
When input resistors are provided with the module, attach
them together with input wiring to the input screw termi-
nals.
The negatives of the input signals must be of the same
potential.

Clamp

(top & bottom)

DIN Rail

35mm wide

Spring Loaded

DIN Rail Adaptor

Shape and size of the base socket 
are slightly different with various 
socket types.

Body

Base Socket

Connection

Diagram Label

Front Cover

LCD Meter

(optional)

Specification

Label

The shape of base socket may be different
for some models. 

BEFORE USE ....

Thank you for choosing M-System.  Before use, check the
package you received as below.
If you have any problems or questions with the product,
please contact M-System's Sales Office or representatives.

■ 

PACKAGE INCLUDES:

Signal conditioner (body + base socket) ................. (1)
Input resistors ......................................................... (2)
The resistors are provided only with current input type.

■ 

MODEL NO.

Check that model No. described on specification label is
exactly what you ordered.

■ 

INSTRUCTION MANUAL

This manual describes necessary points of caution when you
use this product, installation, connection and basic mainte-
nance procedures.

COMPONENT IDENTIFICATION

■ 

HOW TO OPEN THE FRONT COVER:

Position your finger on the hook at the top of front cover and
pull.

Front Cover (open)

Span Adj.

Zero Adj.

Reviews: