9. Other Information
Page 76
9. Robot control
3
Gala-Kool Pro offers two possibilities of controlling a connected robot:
- via the button
“Robot Stop”
Clean
- via the signal
“
ing active”
For both functions, the appropriate parameter settings must be done beforehand.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Signal
(Robot stop via button)
“Robot-Stop”
In [A40] robot operation must be configured and assigned to an output relay
[default = A2 = 2].
Also pay attention to the setting in [A41], so that in the event of a power failure the robot
is correctly controlled. See section 4.6
In OFF mode
Press “ROBOT STOP” button: The robot is started or stopped again (toggle
function). The LED indicates the present status.
If the robot is active (LED “Robot Stop” off) washing will not start. If the washing
button is pressed, the LED will flash.
If cooling mode is activated while the robot is switched off, the robot will start
automatically.
In cooling mode
switching to OFF mode, the robot remains active.
If the button “Robot Stop” is pressed for 3 seconds, the robot is stopped and
cooling mode ends.
In cleaning mode
The button “Robot Stop” does not have a function.
If a fault occurs during washing: the robot is stopped.
When washing is successfully completed:
the robot is automatically released, and
the control unit switches to OFF mode
(cooling must then be started manually or by the robot)
or
if “Automatic start to cooling” is set: cooling mode is activated automatically.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Signal
(robot button has no function)
“
ing active”
clean
is given only during washing or in the event of a fault (washing stopped), if the control
unit has not yet switched back to OFF mode.
Parameter setting: setting “13" must be assigned to one of the relays [A1 to A1 ].
3
If the cleaning button is
pressed before the robot
is stopped, the ROBOT
LED flashes rapidly.
Robot Stop
STOP
Valve open
Summary of Contents for DARI-KOOL GALA-KOOL Pro
Page 29: ...Page 29...
