Page 47
8.3 Level “Extended cooling parameters” (P parameters)
8. Setting of parameters
Drawing off milk through
butterfly valve in cooling mode
pneum.
Range Default
P32 Milk removal options
0 .. 2
0
(hidden if A40 = 0 or 1 )
0: deactivated – not possible to open manually
1: Button function
Opens the butterfly valve directly, for as long as
the button is held down.
The maximum open time can be limited in [P33].
2: Toggle function
Press butterfly valve button for 2 seconds:
Valve opens until button is pressed again (briefly).
The maximum open time can be limited in [P33].
P33 Max. open time for butterfly valve
0 .. 60 sec.
5
For drawing off milk manually
(hidden if A40 = 0 or 1 )
0: no time limit on valve being open
1 to 60: seconds
P34 Lock the butterfly valve in OFF mode,
0 .. 1
0
if robots have not stopped yet
0: Butterfly valve can always be opened
1: can only be opened when robot stopped
Alarm “Water detection in cleaning pipe”
Range Default
Alarm / prevention of water intake into tank during cooling
mode (see also section .9)
9
P36 Milk transfer function settings
0
0: deactivated
1: level controlled (high active), when signal an input
stops pumping (with timeout)
2: level controlled (low active), if no signal at the input
stops pumping (with timeout)
3: only time
P37 Milk transfer – pump max. running time
1 ...50
10
P40 Alarm activation level monitoring 1 / 2 in cooling mode
0
If the level electrode detects water in the cleaning pipe
during cooling mode:
0: deactivated = no consequence
1: activates fault indication [F52] when level 1 is reached
2: as 1, plus outlet valve 1 opens
3: activates fault indication [F52] when level 2 is reached
4: as 3, plus outlet valve 1 opens
Alarm „tank overflow protection“
Range Default
Explanation see section 9.24
P42 Activation tank overflow protection
0 ..
0
4
0: deactivated
1: signal at level input 3 triggers alarm
2:
no signal at level input 3 triggers alarm
3: no function
4: signal at level input 2 triggers alarm
Summary of Contents for DARI-KOOL GALA-KOOL Pro
Page 29: ...Page 29...
