Page 17
Robot operation
Using the ROBOT STOP button, the operation of a connected robot is either
stopped or enabled.
With the start / stop of the robot, the cooling mode of the milk tank is simultaneously
started / stopped.
Hold down the ROBOT STOP button for approx. 3 seconds: robot operation is
either enabled or stopped (Toggle function)
Cleaning mode
Press the “WASH” button:
)
(from OFF mode
Cleaning proceeds automatically in line with your settings.
Depending on the setting in [r97], the display indicates the current cleaning
stage or the temperature.
Exception: During the heating stages the current water temperature is displayed.
Setting parameter [
] = 1
d
r98
isplay max. cleaning temperature reached
allows to
after wash cycle is completed.
To stop cleaning manually
Press OFF button for 3 seconds: The cleaning programme switches to the stop
phase. “ABL” and “F43” flash alternately in the display, indicating “outlet valve
open”.
All currently active relays are de-energised
(apart from “Cleaning active” and “Robot stop”)
The outlet valve opens for a pre-set time and then closes again.
The
“WASHING” LED blinks - code F43 flashes in the display.
yellow
The control unit switches to OFF mode only when the OFF button is pressed
again.
Cleaning does not start
There are various possible causes – depending on parameter settings:
The robot has not been stopped -> Stop.
The butterfly valve is still closed -> Open.
The safety switch is in the wrong position.
No cleaning release from the robot
Displays during main wash
during intake of alkaline detergent: "ALC“
during intake of acidic detergent: "ACI“
during disinfecting: “dESI“
during heating the temperature alternates with "HEAt“
only if the robot is configured
5.2.4 Operation of working level
5. Operation
STOP
Summary of Contents for DARI-KOOL GALA-KOOL Pro
Page 29: ...Page 29...
