2.6
9.
Extend the operator arm so the measurement between the center of the pivot hole on the rear
bracket and the center of the pivot hole in the front mounting measures 50 3/4 inches. After
finding the measurement relock your operator arm.
This is your closed mounting position.
10
. Assemble the front gate mounting bracket as shown below. (bottom ring can be left off if
security is not a concern)
11
. Attach the operator to the post mounting bracket using the supplied pins as shown below,
support the arm to prevent dropping and breakage of the rear fitting. (bottom ring can be left off if
security is not a concern)
