E145
44
732784 - Rev. A
ENGLISH
Display
Function
Default
dc
BOARD CONFIGURATION DOWNLOAD:
This function lets you save the board configuration in the USB memory in
order to store (parameter
00
) or copy the configuration to other systems
(parameter
01
).
If + and – are pressed simultaneously for at least 5 seconds, the following
selection values will appear:
00
= Storage: the configuration file will be saved in the format
E145
_xxx.prg
where xxx=000/001/002 etc. depending on how many configuration files there
are in the USB memory
.
01
= Copy: the configuration file will be saved in the format
E145
.prg by
overwriting
any other configuration file present with the same name, so it can
be used to upgrade another system.
Press + and - to select the desired parameter and, by pressing F, the board
will proceed to save the file and display
Y
when done correctly, or
no
in case
of errors during saving.
--
dt
BOARD TIMER DOWNLOAD:
This function lets you save the board Timer configuration in the USB memory
in order to store (parameter
00
) or copy the Timer configuration to other
systems (parameter
01
).
If + and - are pressed simultaneously for at least 5 seconds, the following
selection values will appear:
00
= Storage: the Timer configuration file will be saved in the format
E145
_xxx.
trm
where xxx=000/001/002 etc. depending on how many Timer configuration
files there are in the USB memory
.
0 1
= Copy: the Timer configuration file will be saved in the format
E145
.trm by overwriting
any other Timer configuration file present with the
same name, so it can be used to upgrade another system.
Press + and - to select the desired parameter and, by pressing F, the board
will proceed to save the file and display
Y
when done correctly, or
no
in case
of errors during saving.
--
dr
BOARD RADIO CODE DOWNLOAD:
This function lets you save in the USB memory the board radio codes in order to
store (parameter
00
) or copy the radio codes to other systems (parameter
01
).
If + and - are pressed simultaneously for at least 5 seconds, the following
selection values will appear:
00
= Storage: the radio codes file will be saved in the format
E145
_xxx.rad
where xxx=000/001/002 etc. depending on how many radio codes files there
are in the USB memory
.
01
= Copy: the radio codes file will be saved in the format
E145
.rad by
overwriting
any other radio codes file present with the same name, so it can
be used to upgrade another system.
Press + and - to select the desired parameter and, by pressing F, the board
will proceed to save the file and display
Y
when done correctly, or
no
in case
of errors during saving.
--
