![background image](http://html1.mh-extra.com/html/faac/e145/e145_manual_3097771029.webp)
E145
29
732784 - Rev. A
ENGLISH
Display
Advanced Function
Default
nd
CYCLE PROGRAMMING (TENS
):
If
AS
=
Y
the display will show the number of tens of cycles after which the
signaling of maintenace request begins (can be set from
0
to
99
).
If
AS
=
no
the display will show the number of tens of work cycles performed.
The value displayed is updated with the succession of the cycles,
interacting with the value in
nc
.
e.g.: if the system has performed 11,218 cycles,
nc
= 11 and
nd
= 21
will be displayed
00
St
AUTOMATED SYSTEM STATUS:
You can exit programming, choosing whether or not to save the configuration
you just performed.
1. set the choice:
Y
to SAVE and EXIT the programming
no
to EXIT the programming WITHOUT SAVING
2. press the button
F
to confirm; at the end the display returns to visualize
the
automated system status
:
Y
00
= CLOSED
01
= OPEN
02
= Stationary then “OPENS”
03
= Stationary then “CLOSES”
04
= In “PAUSE”
05
= Opening
06
= Closing
07
= FAIL SAFE in progress
08
= checking
BUS-2EASY
devices in progress
09
= Pre-flash then “OPENS”
10
= Pre-flash then “CLOSES”
11
=
Emergency open
12
=
Emergency close
HP
=
Hold position
WARNING If power is lost to the board prior to confirmation (step
2.), all changes made will be lost.
F
+
-/R2
You can EXIT programming at any time: press and hold F and
then also - to switch directly to
St
.